當前位置：上海蠻吉光電科技有限公司>>>>ATF5 Sensor

ATF5 Sensor

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地上海市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-12-15 19:05:01瀏覽次數：110次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

暫無信息

上海蠻吉光電科技有限公司

經營模式：其他

商鋪產品：132條

所在地區：上海上海市

詢價 給他留言

產品簡介

TheATF5WDIsATF5isahighspeed,highaccuracy,autonomousdigitalautofocussensor

詳細介紹

The ATF5
WDI’s ATF5 is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting multiple laser dots onto the sample and digitally processing the image, the ATF5 provides fast ａnd accurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.
High Accuracy At Fast Speeds
WDI’s ATF5 sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF5 to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF5’s on-board digital processing allows it to couple this accuracy with extremely high speeds.
Static or Dynamic Autofocus
The ATF5 is continually assessing distance and direction to focus, updating its data every 0.6 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes the ATF5 perfect for scanning very large specimens quickly and precisely.
Maximum Flexibility
By projecting multiple reference spots, the AFT5 sensor operates equally effectively on patterned ａnd un-patterned specimens. This makes it ideal for media such as TFT arrays and photo masks. The ATF5 also automatically adjusts its laser intensity and sensor exposure time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective (99%) surfaces. It is compatible with objectives from 2X to 100X, and wavelengths including UV, NUV and NIR. The ATF5 can also achieve focusing with a programmable offset function, allowing inspection of both the top and bottom surfaces of a transparent medium.
Easy Integration
All of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most types of infinity corrected microscope objectives. The ATF5 can be purchased as a full autofocus system, integrated with either WDI’s MCM+ controller for driving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.

ATF5 AUTO FOCUS & TRACKING SENSOR

ATF5 Sensor
Structured Light Pattern	Seven Dots
Sensor Wavelength	Choice of 660nm or 785nm
Image Detector	Line Scan CMOS
Autofocus Update Rate	20kHz
Static Autofocus Accuracy	± 1/4 Objective Depth of Focus
Fast Tracking Autofocus Accuracy	± 1/2 Objective Depth of Focus

General Performance
Output Data Rate	1.7kHz in tracking mode
Reflectivity Adaption Delay	2ms
aser Type	Semiconductor
Laser Safety	Class 2
Weight	250g
Dimensions	40 X 40 X 120mm
Maximum Cable Length	1.8m
Compliance	CE SEMI
External Requirements
Specimen Reflectivity	1% ~ 99%
Glass Thickness	> 0.5mm
Diffusing Specimen	Yes
Specular Specimen	Yes
Patterned Specimen	Yes
Textured Specimen	Yes
Operating Specifications
Input Voltage	18V ~ 25V, 24V Nominal
Operating Temperature	18°C ~ 35°C
Storage Temperature	10°C ~ 45°C
Humidity	10% ~ 75% Non Condensing