上海榮計達儀器科技有限公司**經營水泥實驗儀器、混凝土實驗儀器、公路土工實驗儀器、干粉砂漿保溫砂漿實驗儀器、瀝青防水材料實驗儀器、油漆涂料實驗儀器、無損檢測等實驗儀器。**經營水泥實驗儀器、混凝土實驗儀器、公路土工實驗儀器、干粉砂漿保溫砂漿實驗儀器、瀝青防水材料實驗儀器、油漆涂料實驗儀器、無損檢測等實驗儀器。公司產品憑借過硬的質量、完善的售后服務、合理的價格各大院校、檢測單位、建材企業、工程建設單位。在消費者當中享有較高的地位和良好的口碑，用戶遍布國內近三十個省市、自治區，并遠銷國外，與用戶建立了長期穩定的合作關系。公司實力雄厚，重信用、守合同。有健全的管理制度和完善健全的質量管理體系。并有反應迅速、服務周到的售后服務系統。我們將不懈努力、一如既往以?xún)?yōu)異的品質為客戶服務。

Shanghai Rongjida Instrument Technology Co., Ltd. ** operates cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. ** Operating cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. Company products rely on excellent quality, perfect after-sales service, reasonable prices sell well in major universities, testing units, building materials enterprises, engineering construction units. It enjoys a high status and a good reputation among consumers, and has customers in nearly 30 provinces, cities, and autonomous regions in China, and has been exported to foreign countries. It has established long-term and stable cooperative relationships with users. The strength of the company, credit and contract compliance. Have a sound management system and a sound quality management system. And has a responsive and thoughtful after-sales service system. We will make unremitting efforts to serve our customers with excellent quality as always.

礦物料粘附性試驗機是**檢測儀器，依照標準GB/T 328.17-2007《建筑防水卷材試驗方法》“第17部分：瀝青防水卷材礦物料粘附性"B法研制的。由上海榮計達儀器科技有限公司提供，可在一定負載和刷洗次數下，將被測礦物卷材試件刷洗至標準要求，以備礦物料粘附性的測定。

The mineral material adhesion tester is a testing instrument developed in accordance with the standard GB / T 328.17-2007 "Test Methods for Building Waterproofing Coil" "Part 17: Asphalt waterproofing material mineral material adhesion" B method. Provided by Shanghai Rongjida Instrument Technology Co., Ltd., under certain load and brushing times, the test specimens of mineral coils can be brushed to the standard requirements for the determination of the adhesion of mineral materials.

礦物料粘附性試驗機技術參數：

★刷子部件重量：2268±7g

★置數范圍：0～9999

★刷子部件往復工作頻率：50次/分

★電源電壓：220V 50Hz

★外形尺寸：600㎜×420㎜×360㎜

Technical parameters of mineral material adhesion tester:

★ Brush part weight: 2268 ± 7g

★ Setting range: 0 ～ 9999

★ Brush parts reciprocating working frequency: 50 times / minute

★ Power supply voltage: 220V 50Hz

★ Dimensions: 600㎜ × 420㎜ × 360㎜

礦物料粘附性試驗機使用方法：

★將儀器平穩放在工作臺上。

★接通電源，打開開關，計數器顯示0，按——鍵，顯示器閃爍，按向上箭頭，數值增加，按向右箭頭二位數值閃爍，按向上箭頭，數值增加，以此類推，調整好，10秒后閃爍停止，數值存入系統內，調整好所需數值后，儀器便可正常工作，O鍵是清零復位鍵。

★將刷子提前鎖緊，將試件放置在壓腳下壓緊，放下刷子。

★按啟動鍵，儀器開始工作。計數器自動計數，達到所設置次數后停機，如需再次啟動，按O鍵，計數器清零，機器再次啟動。

★取下試講用真空吸塵器在試件表面移動，吸去落下的顆粒。

★測定每個試件的質量。

How to use mineral material adhesion tester

★ Place the instrument on the workbench stably.

★ Turn on the power, turn on the switch, the counter displays 0, press the —— key, the display blinks, press the up arrow to increase the value, press the right arrow to flash the two digits, and press the up arrow to increase the value, and so on. After 10 seconds, the flashing stops and the value is stored in the system. After adjusting the required value, the instrument can work normally. The O key is the reset key for clearing.

★ Lock the brush in advance, place the test piece under the presser foot, and lower the brush.

★ Press the start key, the instrument starts to work. The counter counts automatically and stops after reaching the set number of times. If you need to start again, press the O key to clear the counter to zero and the machine starts again.

★ Remove the test piece and use a vacuum cleaner to move on the surface of the test piece to suck out the falling particles.

★ Determine the quality of each test piece.

礦物料粘附性試驗機注意事項：

★試驗完畢后關閉電源，以免計時器長時間通電造成不必要的損壞。

★使用完畢后，搽拭干凈，罩好防塵罩。

★儀器電源有效接地。

Notes on Mineral Adhesion Tester

★ Turn off the power after the test to avoid unnecessary damage caused by the timer being powered on for a long time.

★ After use, wipe clean and cover the dust cover.

★ The instrument power is effectively grounded.