當前位置：上海榮計達儀器科技有限公司>>交通工程檢測儀器>>STT-980硅芯管冷彎曲半徑試驗儀

STT-980硅芯管冷彎曲半徑試驗儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號STT-980

品牌

廠商性質其他

所在地上海市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-10-15 12:14:18瀏覽次數：76次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  交通工程檢測儀器

全部產品列表

暫無信息

上海榮計達儀器科技有限公司

經營模式：其他

商鋪產品：1006條

所在地區：

聯系人：王林

詢價 給他留言

產品簡介

硅芯管冷彎曲半徑試驗儀按照中華人民共和國交通行業標準JT/T496-2004《公路地下通信管道高密度聚乙烯硅芯塑料管》中硅芯管冷彎曲半徑試驗方法研制的。該設備簡潔直觀，是生產及質量監督檢驗部門的設備。

詳細介紹

硅芯管冷彎曲半徑試驗儀是**檢測儀器，適用于測定低溫下硅芯管的抗彎曲性能。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。

Silicon core tube cold bending radius tester is a testing instrument, which is suitable for measuring the bending resistance of silicon core tube at low temperature. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.

硅芯管冷彎曲半徑試驗儀按照中華人民共和國交通行業標準JT/T496-2004《公路地下通信管道高密度聚乙烯硅芯塑料管》中硅芯管冷彎曲半徑試驗方法研制的。該設備簡潔直觀，是生產及質量監督檢驗部門的設備。

Silicon core tube cold bend radius tester was developed in accordance with the People's Republic of China Transportation Industry Standard JT / T496-2004 "High-density polyethylene silicon core plastic pipe for highway underground communication pipelines". The equipment is simple and intuitive, and is the equipment of the production and quality supervision and inspection department.

硅芯管冷彎曲半徑試驗儀技術參數：

能夠滿足直徑在32-63mm不同直徑的地下通信管道高密度聚乙烯硅芯塑料管。

其他檢測設備：溫度能控制在-20℃±2℃的低溫箱。

樣品：取3根1.5米(當外徑大于40mm時2m)長的硅芯管作為試樣用于產品的彎曲性能試驗，試驗前試樣應放置在-20℃±2℃溫度下保持2h。

判定規則：試樣經過彎曲試驗后，應不出現開裂、裂紋或明顯應力發白現象

Technical parameters of silicon core tube cold bending radius tester:

It can meet the high-density polyethylene silicon core plastic pipes for underground communication pipelines with different diameters between 32-63mm.

Other testing equipment: low temperature box whose temperature can be controlled at -20 ℃ ± 2 ℃.

Samples: Take three silicon core tubes with a length of 1.5 meters (2m when the outer diameter is greater than 40mm) as samples for the bending performance test of the product. Before testing, the samples should be placed at -20 ℃ ± 2 ℃ for 2h.

Judgment rule: After the sample is subjected to a bending test, it should not show cracks, cracks or obvious stress whitening

硅芯管冷彎曲半徑試驗儀電鍍部份請以機油擦拭，以防止生銹宜保光亮，硅芯管冷彎曲半徑試驗器外表經常擦拭，保持清潔。

The electroplated part of the silicon core tube cold bend radius tester should be wiped with oil to prevent rust and should be bright. The surface of the silicon core tube cold bend radius tester should be wiped frequently to keep it clean.

硅芯管冷彎曲半徑試驗儀冷結構組成：

該儀器由支撐底座及五個不同直徑的標準輪轂組成，每個輪轂有3-5對壓固螺栓壓固片構成。

Cold structure of silicon core tube cold bending radius tester:

The instrument consists of a support base and five standard hubs with different diameters. Each hub consists of 3-5 pairs of compression bolts.

其他推薦產品更多>>